Care and Maintenance

2
Don’ts :
• Never use steam cleaners on a Build Surfaces Laminate floor
• Never use highly concentrated soap solutions on the floor
• Do not use organic detergents, they will leave a thin film of grease on the surface, resulting in visible footprints.
Only synthetic detergents are recommended.
• Do not wax, varnish or polish the floor
Stains Remove with
Blood Wrung-out cloth
Coffee, tea, chocolate, juice, milk, wine, beverages, grease Wrung-out cloth, lukewarm water and a small amount of
synthetic detergent
Rubber, oil, tar, shoe polish, soot, nail varnish, lipstick,
drawing ink, colour pencil, chalk, paint
Methylated spirit/white spirit/acetone
(these solvents are not to be used in V-grooves!)
Wax from candles, chewing gum Allow to harden, scrape off carefully using a plastic scraper,
clean remains with acetone
3. STAINS/ DAMAGE REPAIR
Stubborn stains can be cleaned as shown in the table below:
Never use steel wool or other abrasive cleaning methods on a Build Surfaces Laminate floor.
Damages such as tears and cuts in the surface can be repaired with a laminate flooring repair kit. Seriously damaged
floorboards should be completely replaced.
4. WARRANTY
By following the above instructions, you will extend the longevity of your laminate floor and ensure the validity of the
warranty.
We refer to our warranty conditions or warranty policy for more info.
Care & Maintenance Instructions