Care and Maintenance

CARE & MAINTENANCE
INSTRUCTIONS
1. PROTECT
Build wear-resistant floor with a long lifespan and a hygienic hard surface.
To protect your floor, we recommend the following actions:
Surfaces Laminate is an easy-care,
• Place a suitable doormat at your entrance(s) to absorb dirt and/or moisture. Sand and dirt can have the effect of
“sandpaper” and may cause premature wear and tear or scratches.
• Place felt pads under the legs of chairs and tables to avoid scratches.
• Equip other furniture and heavy objects with felt pads for safe moving.
• Clear plastic mats must be used under office chairs with wheels.
changes in the indoor climate.
60% and
a temperature
Indoor temperature and relative air humidity
The Build Surfaces Laminate floor is produced from wood material that reacts on
The ideal indoor climate for a laminate floor is a relative humidity between 40% and
between 65°F and 77°F (18°C and 25 °C).
Static electricity
Build Surfaces Laminate is a partially insulating floor covering. If the relative humidity in the room is kept at
around RH 50% or more then this will reduce the floor’s ability to develop static charges.
Wet cleaning methods
When cleaning with water, a well wrung-out cloth and lukewarm
water are recommended. Avoid using too much water.
These
instructions apply to all Build Surfaces floors .
1
Care & Maintenance Instructions
2. CLEAN
Build Surfaces laminate floors are extremely easy to clean. In
very little time and with minimal effort you can enjoy a clean
and beautiful floor for many years.
Dry cleaning methods
For daily cleaning, we recommend that you use a soft brush,
vacuum cleaner with no beater bars or a dry dust mop.
Microfiber mops are ideal.