Installation Instruction Two Handle Lavatory Faucet Model: 67840W-7004 Sku: 7840BN 1
*Specify Finish 1 2 3 4 7 14 8 5 9 10 6 11 12 13 PART PIEZA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DESCRIPTION DESCRIPCIÓN Handle assembly / Ensamblaje de la llave Bonnet nut / Tuerca del bonete Cartridge H / Cartucho H Cartridge C / Cartucho C Washer / Arandela Nut & Screw / Tuerca y Tornillo Aerator / Aireador Washer / Arandela Lock nut / Tuerca de bloqueo Block / Bloque O-ring / Aro tórico Quick connect hose / Manguera de conector rápido Pop-up assembly less lift rod / Ensamblaje emergente, sin varilla
Product Dimension Drawing 13 1/8" [333.2mm] 6 7/16" [163.3mm] 8" [203.2mm] 8 27/32" [224.9mm] 5" [127.4mm] 2 1/16" [52.0mm] 5 13/32" [137.3mm] 1 13/32" [35.5mm] 1 15/32" [37.7mm] 1/2-14NPSM-2A 2 1/32" [52.
1 2 4 3 2 2 1 1 5 Shut off the water supply. Remove the preassembled lock nut (1) and washer (2) from the new faucet. Place the faucet through the mounting holes in the sink. Secure the faucet to the sink using the washer (2) and lock nut (1) provided. NOTE: Ensure that the hole for the lift rod faces toward the rear of the sink during installation. When you insert the lift rod, the lift rod can go through the faucet and down into the slot of the washer (2).
6 1 2 3 1 5 3 2 4 4 Apply silicone to underside of flange (1). Insert body (2) into drain hole from below sink. Screw flange (1) into body (2). With pivot (3) facing toward faucet, pull pop-up straight down into drain hole and secure gasket, plastic washer and brass nut. Apply sealant tape to threads at the top of tailpiece (4) and hand tighten. Note: Don’t drop silicone onto gasket (5). Install horizontal rod (1) and stopper (2) as non-removable (3). Hand tighten pivot nut (4).
9 1 Flushing and checking for leaks: Ensure the faucet handles are in the off position and turn on the water supply to check for leaks. If you discover any leaks, check your connections to ensure they are installed properly. Remove the aerator and housing (if applicable). Do not lose the gasket (1) in the aerator. Turn on the hot and cold handles to allow the water to run for at least one minute. This flushes away any debris that could cause damage to internal parts.
Cleaning Recommendations Today, modern sanitary and kitchen tapware, showers, accessories, washstands, tubs and consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and product failures and not void Warranty please follow the below guideline. •Only use cleaning material which is explicitly provided for this type of application.
Limited Lifetime Faucet Warranty LIMITED CONSUMER WARRANTY This product has been manufactured and tested to the highest quality standards. This warranty is limited to products that are purchased by a consumer in the United States or Canada after June 1, 2017, and installed in either the United States or in Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is non-transferable.
