User Guide

Then, without shutting off the engine, follow these steps:
r
1. Flip the handle up and
then pull
out the dipstick
and wipe it with a clean
rag or paper towel.
2. Push it back in all the way, wait three seconds and
then pull
it back out again.
L
3. Check both sides of the dipstick, and read the lower
level. The fluid level must be in the COLD area for a
cold check or in the HOT area
or cross-hatched area
for a hot check.
4. If the fluid level is in the acceptable range, push the
dipstick back
in all the way; then flip the handle
down
to lock the dipstick in place.
6-15