User Guide

CRUISE
(The “CRUISE’ light on
the instrument panel will
come on.)
You’ll
go right back up to
your chosen speed and stay
there.
4. Take your foot off the accelerator pedal.
To Resume a Set Speed
Suppose you set your Cruise Control at a desired speed
and then you apply the brake. This, of course, shuts
off
the Cruise Control. But you don’t need to reset it. Once
you’re going about
25 mph (40 km/h) or more, you can
move the Cruise Control switch
fiom “ON’ to
“Resume/Accelerate” for about half a second.
Remember if you hold the switch at
“Resume/Accelerate” longer than half a second, the
vehicle will keep going faster until you release the
switch or apply the brake. You could be startled and
even lose control.
So unless you want to go faster, don’t
hold the switch at “Resume/Accelerate.”