Specifications

7. Don’t let the other end
touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive
(+) terminal
if the vehicle has one.
Don’t let the other end touch anything until the next
step. The other end of the negative
(-) cable
doesn’t go to the dead battery. It goes
to a heavy,
unpainted metal part, or to the remote negative
(-)
terminal on the vehicle with the dead battery.
9. Connect the other end of the negative (-) cable at
least 18 inches (45 cm) away from the dead battery,
but not near engine parts that move. The electrical
connection is just as good there, and the chance
of sparks getting back to the battery is much less.
8.
Now connect the
negative
(-) cable to
the negative
(-)
terminal of the good
battery. Use a remote
negative
(-) terminal
if the vehicle has one.
IO. Now start the vehicle with the good battery and run
the engine for a while.
5-48