Specifications

DlSP (Display): Press this button to see which track is
playing. Press it again within five seconds to see
how long it has been playing. To change what
is
normally shown on the display (track or elapsed time),
press this button until you see the display you want,
then hold the button until the display flashes.
la SEEK Dl : Press the left arrow to go to the start
of the current track
if more than eight seconds have
played. If you hold the button or press it more than once,
the player will continue moving back through the disc.
Press the right arrow to go to the next track. If you hold
the button or press it more than once, the player will
continue moving forward through the disc.
To scan CD tracks, press and hold one of the SEEK
arrows for two seconds until SCAN appears on the
display. You will hear a beep. The disc will go to the next
track, play for a few seconds, then go on to the next
track. The sound will mute and SCAN and the track
number will appear on the display while scanning.
The disc will only scan forward. Press one of the SEEK
arrows again to stop scanning.
BAND: Press this button to listen to the radio when a
CD is playing.
CD: Press this button to change to playing a CD when
listening to the radio.
(Eject): Press this button to eject a CD.
Compact Disc Errors
CHECK CD: If this message appears on the radio
display, it could be due to one of the following reasons:
You’re driving on a very rough road. When the
road is smoother, the disc should play.
The disc is dirty, scratched, wet or upside down.
The air is very humid. If so, wait about an hour and
try again.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer.
If your radio displays
an error number, write it down and provide it to
your dealer when reporting the problem.
3-64