Specifications

FUEL INFO (information): Press this button to display
fuel information.
Press the FUEL INFO button until the display shows
FUEL ECONOMY AVERAGE. Average fuel economy is
viewed as a long term approximation of your overall
driving conditions. To learn the average fuel economy
from a new starting point, press the RESET button while
the average fuel economy is displayed in the DIC.
Press the FUEL INFO button until the display shows
FUEL ECONOMY INST. Instantaneous fuel economy
varies with your driving conditions, such as acceleration,
braking and the grade of the road being traveled.
The RESET button does not function
in this mode.
Press the FUEL INFO button until the display shows
FUEL RANGE. The fuel range will calculate the
remaining distance you can drive without refueling.
This calculation is based on the average fuel economy
for the last 25 miles (40.25 km) driven, and the fuel
remaining in the fuel tank. The RESET button does not
function
in this mode.
GAGE INFO (Information): Use this button to display
oil pressure, oil life, coolant temperature, tire pressure
and battery information.
Press the GAGE INFO button until OIL PRESSURE
appears in the display.
If there are no problems
detected with the oil pressure, the display will show
OIL
PRESSURE NORMAL. If a low oil pressure condition is
detected, the display will show OIL PRESSURE LOW.
If you see the OIL PRESSURE LOW message, your
vehicle could be low on oil or the oil is not going through
the engine properly. See your dealer for service.
Press the GAGE INFO button until COOLANT TEMP
appears in the display. If there are
no problems detected
with the temperature, COOLANT TEMP NORMAL will
appear in the display.
If the temperature is too high,
COOLANT TEMP HOT will appear in the display.
If you
see the COOLANT TEMP HOT message, the engine is
overheated. You should pull
off the road, stop your
vehicle and turn
off your engine as soon as possible.
This manual explains what to do. See
Engine
Overheating on page 5-28.
3-48