Specifications
bühler
2500 Hayliner
6
Never leav e the tractor unattended while the 2500 Hayliner is hooked up, alway s
shut tractor off and remove key before leav ing the tractor seat. A child or ev en a pet
could engage an idling machine.
Keep the 2500 Hayliner on so lid ground, rocks and holes c an be dangerous for
operation and movement.
Prior to use, check to ensure the attachment is properly hitched.
Improper use of the 2500 Hayliner and tractor can cause serious injury or death.
Never operate 2500 Hayliner with frayed or damaged hoses or leaking fittings. A
burst could cause one or more hydraulic components to behave erratically causing
serious injury or lose of life.
Operate 2500 Hayliner only while seated in the tractor seat.
Do not load bales im properly, always load according to the manual’s operation
procedures.
If for some reason you feel the tractor tipping immediately lower lift arms.
Do not rais e lift arms to extr eme heights while tractor is on an incline. Be alert for
terrain changes and adjust accordingly.
Allow for 2500 Hayliner and tractor length when turning.
Do not overload the GVW of 37 440 LB (16983 kg) and when loaded keep the speed
below 20 mph (32 km/h).
Before allowing any one to operate the mach ine, for however a short time or
distance, make sure they have been instructed in its safe and proper use.
Review the manual and all safety related items with all operators annually.
correct other operators not using re commended pr ocedures before an accident
occurs.
When ass embling, operating and servicing machinery, wear all the protective
clothing and personal safety devices that could be necessary for the job at hand.
Never work beneath a raised lift arm unless it is securely supported. The control
handle can be moved or a hydraulic leak c ould caus e the arm to drop resulting in
serious injury or death.
Use only service and repair parts made or approved by the equipment manufacturer.
substituted parts may not meet strength, design, or safety requirements.
Do not modify the machine. Unauthorized modifications may impair the function
and/or safety and affect machine life.
Keep the area used for servicing machinery clean and dry. Wet
or oily floors are slippery. Wet spots can be dangerous when
working with electrical equipment. Be sure all electrical outlets
and tools are properly grounded.
Keep mac hinery clean. Straw and chaff on hot surfaces are a fire hazard. Do no t
allow oil or grease to accumulate on service platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any volatile material for cleaning purposes . Thes e
materials may be toxic and/or flammable.
When storing machinery, cover sharp or extending c omponents to prevent injury
from accidental contact.