Drag Harrow TABLE OF CONTENTS DESCRIPTION PAGE WARRANTY................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY....................................................................... 3 Safety ..................................................................... 3 General Safety ....................................................... 4 Start-up Safety .......................................................
Drag Harrow WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Drag Harrow INTRODUCTION The Buhler Farm King Drag Harrow 3-point hitch harrow is ideal for freshening horse paddocks and pastures. It also helps to dry out your yard or driveway when conditions are wet. 80” and 100” bars accept any combination of 40” and 60” harrow sections, giving a maximum ground coverage of 10’. This product is Quick Hitch compatible. Keep this manual handy for frequent reference.
Drag Harrow SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices. The alert symbol is used throughout this manual.
Drag Harrow GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear.
Drag Harrow SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded - use adequate light for the job Use only tools, jacks, and hoists of sufficient capacity for the job.
Drag Harrow DRAG HARROW ASSEMBLY INSTRUCTIONS 1. 2. 3. Assemble the hitch (#1), boom (#2) and braces (#3) using the hardware supplied. Mount the assembly on the tractor using the three point pins. Space the stakes according to the size of harrow sections used (see drawing on next page). Mount the stakes using stake caps, ½” x 1 ½” hex bolts, ½” lock washers and ½” hex nuts. Simultaneously fasten the 10-link drag chain between the stake and stake cap using the same bolts.
Drag Harrow OPERATION THEORY OF OPERATIONS MAINTENANCE 7
Drag Harrow 8
Drag Harrow WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
Drag Harrow SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit. QUANTITY BUNDLE NO.
NOTES
DIVISION LOCATIONS Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43rd Street N.W. Fargo, ND 58102 Ph: (701) 282-7014 Fax: (701) 282-5865 CANADIAN WAREHOUSES U.S.
