Land Rake TABLE OF CONTENTS DESCRIPTION PAGE WARRANTY................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY....................................................................... 2 Safety ..................................................................... 2 General Safety ....................................................... 3 Start Up Safety .......................................................
Land Rake WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Land Rake INTRODUCTION The Buhler Farm King Land Rake is available in 5’, 6’, 7’ & 8’ models. The rake swivels to five positions. The shank bar has welded wedges to maintain spacing. Optional gauge wheels are available. This product is also quick hitch compatible. Keep this manual handy for frequent reference. All new operators or owners must review the manual before using the equipment and at least annually thereafter.
Land Rake GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear.
Land Rake STORAGE SAFETY Store the unit in an area away from human activity. Do not permit children to play on or around the stored machine. Support the frame on stands and blocks to provide a secure base. SAFETY SIGNS The following illustration shows the approximate location and detail of safety signs. Keep all safety signs clean and legible and replace any that are damaged or missing. When original parts are replaced, any safety signs affixed to those parts should be replaced as well.
Land Rake START-UP 1. Park on a dry level area clear of debris. 2. Stop engine and set brake after lowering the three point arms so they line up with the mounting pins on the blade. 3. Mount the lower lift pins first and then adjust the rake angle using the turnbuckle on the top link. Check that all the clips holding on the three point pins are securely in place. 4. The land rake is designed to be used on tractors with up to 35 horsepower with a category 1 3-point hitch.
Land Rake OPERATION 1. Clear the area of bystanders and foreign objects before starting. 2. Use the float position on the three-point control to follow the contour of the ground. The weight of the blade will keep it down. 3. Maintain a speed that allows you to maintain control of your machine. 4. The 1” wide spring steel tines (#11) clear off unwanted material and prepare an ideal seedbed ready to accept small seeds or sod.
Land Rake MAINTENANCE 7
Land Rake WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
Land Rake 29 30 31 32 33 34 35 36 37 38 39 902277 901435 81626 961012 812364 966729 81593 81592 81578 966527 81723 Stand 1/2" x 2 1/2" Clevis Pin (pl) 1/2" x 2 3/4" Hex Bolt NC (pl) Hair Pin Clip #16 1/2" Lock Nut (pl) 3/16" Linch Pin (pl) 3/8" Lock Washer (pl) 3/8" Hex Nut (pl) 3/8" x 1 3/4" Hex Bolt (pl) 7/8'' x 2 1/2'' Hex Bolt (pl) 7/8'' Lock Washer (pl) 9
Land Rake SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit. QUANTITY BUNDLE NO.
NOTES
DIVISION LOCATIONS Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43rd Street N.W. Fargo, ND 58102 Ph: (701) 282-7014 Fax: (701) 282-5865 CANADIAN WAREHOUSES U.S.
