Operator`s manual

9
\
13. Install the hydraulic coupler bracket to the two
lower outside cap screws and install the
remaining two jam nuts, 2, on top of the coupler
bracket. Torque all eight jam nuts to 576 N⋅m
(425 ft. lbs.).
30000621
1
2
2
16
14. If the tractor is equipped with the optional PTO,
remove the cap from the lube line and the elbow
fittingandconnectthelubeline,1,tothedropbox
elbow. Tighten the fitting securely.
30000616
1
17
15. If the tractor is not equipped with the optional
PTO, use an appropriate liftingdevice and install
the upper link bracket, 1. Secure the bracket to
therearframeofthetractorwith twelveM20x 80
cap screws, 2, and M20 flange nuts. Torque the
hardware to 460 N⋅m (340 ft. lbs.).
For tractors not equipped with an optional PTO,
skipstep #15,16,17,and18 andproceedtostep
#19.
1
2
2
2
18