Operator`s manual

4. Remove the two cap screws and flange nuts, 1,

for the hydraulic coupler bracket, 2. Discard the

hardware at this time.

30000615

5. If the tractor is equipped with an optional PTO,

disconnect the lube line, 1, from the PTO drop

box. Cap the elbow fitting for the lube line.

6. Fold the hydraulic coupler support bracket and

PTO lube line back and secure it to the

implement valve.

30000616

7. Using a proper lifting devise, align the left and

right hand side lower link brackets, 1, to the rear

frame of the tractor. Secure the lower link

brackets with six M20 x 60 cap screws and M20

serrated flangenuts,2,in thefrontof thebracket.

Torque the hardware to 576 N⋅m (425 ft. lbs.).

30000617