Operator`s manual

42
\
FINAL ADJUSTMENTS
RATE OF RAISE
1. Remove the implement valve shield, 1, by
removing the four attaching screws and lock
nuts, 2.
1
2
110
2. Turn the 3PT Hitch Valve flow control stem, 1,
CCW to increase the rate of raise and turn the
stem CW to decrease the rate of raise. The
operator can set this adjustment to any position
desired for the implement being attached to the
tractor.
3. Install the implement valve shield and attaching
hardware.
WARNING
Only adjust the rate of raise when the 3-point
hitch controls are in neutral position and the
tractor is shut off.
111