Operator`s manual

41
\
4. Install the seat into the cab as detailed in Section
11 - Cab of the Buhler Versatile Large 4WD
service manual.
108
5. Install the implement valve shield, 1, which was
removed in the tractor preparation section of
these instructions.
6. Install the wheels to the tractor and torque the
hardware to 710 N⋅m (525 ft. lbs.).
7. Connectthe batterycablesas detailedinSection
3 - Electrical of the Buhler Versatile Large 4WD
service manual.
8. Check the hydraulic fluid level and top off if
necessary.
9. Start the tractor and operate the 3 point hitch in
the manual and automatic modes and check for
any leakage and make certain that no wires or
hoses are pinched.
1
109