Operator`s manual

37
\
25. Insert a small screwdriver into the slot indicated
by the arrow on the face of the connector body,
1. Pry upward on the body and pry it out of the
connector housing.
30000693
1
97
26. Routethe three wires (TP-1F,TP-1E andTP5C),
1, through the adapter, 2, washer, 3, and seal, 4.
Positionthe wires in thebody ofthe connector,5.
30000694
2
3
4
1
5
98
27. Each connector body is clearly marked 1-2-3 on
the face of it. Insert the wires to the proper
location and tighten the screws. Attach the wires
to the body using the following chart:
LOCATION WIRES
1 TP-1F, TP-1E
2 TP--5C
3 Blank
30000695
99