Operator`s manual

29
\
SECTION 3
ELECTRICAL COMPONENT INSTALLATION
1. Using two M6 x 12 cap screws, 1, install the
lowering rate controller, 2, to the existing
three-point hitch bracket in the right corner of the
cab. This bracket is resident in all80/82/84/2000
Series tractors. Tighten the hardware securely.
30000677
2
1
73
2. Install the three-point hitch controller, 1, to the
bracketbyusingtwo M6x 12 cap screws,2. The
three-point hitch controller is symmetrical and is
installed above the lowering rate controller.
30000678
1
2
2
74
3. On 80/82 Series tractors install the three-point
hitchautomaticswitch,1,totheoutsidecutouton
top of the right hand side console.
1
75