Operator`s manual

14
\
33. When the lower link and pin is aligned properly,
secure it to the lower link bracket with a plate, 1,
anda1/2-13UNCx1.00flangescrew,2.Tighten
the hardware securely.
20000635
2
1
31
34. Attach the lower end of the lift link, 1, to the lower
link by installing a pin, 2. Install a washer, 3, on
the inside of the pin and secure it with a klik pin,
4. Make certain that the float slot in the link faces
the front of the tractor and the pin is positioned in
the rear hole of the lower link.
35. Repeat steps 31 through 34for theleft hand side
lift link and lower link.
20000636
1
4
3
2
32
36. Install the upper link, 1, to the bracket,2, with the
narrow end of the upper link going through the
upper hole in the mounting bracket. Secure the
upper link with a pin, 3, and snapper pin, 4.
20000637
1
3
2
4
33