SDS

BuggyBeds
SAFETY DATA SHEET
MSDS Date: October 1, 2018
Page%1%of%3
Not expected as a result of exposure to finished product.
SECTION 5: FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA: Use fire extinguishing materials appropriate for surrounding fire including water spray, dry chemical, carbon dioxide (CO2),
and foam.
UNUSUAL FIRE AND EXPLOSION HAZARDS: This product contains no unusual fire and explosion hazards.
ACCIDENTAL RELEASE MEASURES: If trap breaks and glue is transferred onto a surface, remove glue by applying mineral spirits to spilled area,
followed by washing area with warm water and detergent. If plastic trap housing is still intact and glue is untouched, re-use trap.
Avoid ingesting any part of this product. (N/A for exposure to finished product)
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name of the Substances:
AUTOIGNITION TEMPERATURE:
N/A
Avoid contact with any part of this product. (N/A for exposure to finished product)
HAZARDS DISCLOSURE: According to the definitions set by the OSHA Hazard Communication Standard 29 CFR 1910. 1200. this product does not
contain known hazardous materials. As defined under Sara 311 and 312, this product does not contain known hazardous materials.
POTENTIAL ENVIRONMENTAL RISKS:
SECTION 4: FIRST AID MEASURES
Treat symptoms.
Cherry Laurel Oils
Hydrocarbon/Petroleum Resin
CAS #: 64742-16-1
3.00%
3.45%
EU DANGEROUS PREPARATIONS DIRECTIVE (DPD) LABELING AND CLASSIFICATION: This product does not meet the definition of any hazard
class, as defined by the European Union Council Directives 67/548/EECand 1999/445/EC and subsequent Directives.
UPPER:
LOWER:
N/A
N/A
Crystal Polystyrene - Clear (Virgin & Recycled)
CAS #: 9003-53-6
90.00%
Benzene, ethenyl-, polymer with (1-methylethenyl) benzeze
CAS #: 9011-11-4
3.50%
CAS #: 8000-44-0
0.05%
SKIN:
INGESTION:
INHALATION:
NOTES TO PHYSICIANS;
Not expected as a result of exposure to finished product.
Constant monitoring and product replacement is not expected to cause any situation which could lead to
ingestion.
Avoid inhaling potentially toxic fumes if, for any reason, product is heated to decomposition. This product
may produce toxic fumes when heated to decomposition. (N/A for exposure to finished product)
INHALATION:
INGESTION:
EYES:
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
MANUFACTURER'S NAME:
(% BY VOLUME)
FLAMMABLE LIMITS IN AIR
N/A (Combustible Solid)
FLASH POINT:
ADDRESS:
BUSINESS PHONE:
WEBSITE:
BuggyBeds Bed Bug & Flea & Tick Glue Traps
U.S. & Foreign Patents Pending; Copyright Protection; U.S. & Foreign
Trademark Protection
VCM Products, LLC
326 Brandon Blvd. Freehold, NJ 07728
[phone]
www.vcmproducts.com
A passive monitoring device to lure and detect bed bugs, fleas & ticks.
PRODUCT DESCRIPTION:
SECTION 2: HAZARDOUS IDENTIFICATION
None
This product is classifed as an "article"* according to Title 29 of the Code of Federal Regulations, OSHA Part 1910.1200.
*Article means a manufactured item other than a fluid or particle, which is formed to a specific shape or design during manufacture which has end use
funtion dependent in whole or in part upon its shape or design during end use, and which under normal conditions of use does not release more than
very small quantities or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees."
EMERGENCY OVERVIEW: BuggyBeds glue traps is a finilazed product that is intented to passively monitor for bed bugs, and/or fleas & ticks by
attracting the bugs for the sole pupose of detection. The trap is constructed of a clear polystyrene which consists of a top piece and a bottom piece. A
non-hazardous resin glue is poured into the bottom piece. Other ingredients are used as bio lures and/or fragrance.
Styrene/Isoprene Copolymer
CAS #: 25038-32-8
SECTION 6: ACCIDENTAL RELEASE MEASURES