MSDS

BuggyBeds
MATERIAL SAFETY DATA SHEET
MSDS Date: September 1, 2011
SECTION 6: ACCIDENTAL RELEASE MEASURES
UNUSUAL FIRE AND EXPLOSION HAZARDS: This product contains no unusual fire and explosion hazards.
ACCIDENTAL RELEASE MEASURES: If trap breaks and glue is transferred onto a surface remove glue by applying mineral spirits to
spilled area, followed by washing area with warm water and detergent. If plastic trap housing is still intact and glue is untouched, re-use trap.
SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS
SECTION 3: HAZARDOUS IDENTIFICATION
Other Ingredients
CAS #: Non-Hazardous
EINECS #: N/A
AUTOIGNITION TEMPERATURE:
EXTINGUISHING MEDIA: Use fire extinguishing materials appropriate for surrounding fire including water spray, dry chemical, carbon
dioxide (CO2), and foam.
POTENTIAL ENVIRONMENTAL RISKS:
LOWER:
EYES:
Not expected as a result of exposure to finished product.
Not expected as a result of exposure to finished product.
SECTION 4: FIRST AID MEASURES
NOTES TO PHYSICIANS;
Not expected as a result of exposure to finished product.
INHALATION:
HAZARDS DISCLOSURE: According to the definitions set by the OSHA Hazard Communication Standard 29 CFR 1910. 1200. this product
does not contain known hazardous materials. As defined under Sara 311 and 312, this product does not contain known hazardous
materials.
BUSINESS PHONE:
WEBSITE:
This product is classifed as an "article"* according to Title 29 of the Code of Federal Regulations, OSHA Part 1910.1200.
*Article means a manufactured item other than a fluid or particle, which is formed to a specific shape or design during manufacture which has
end use funtion dependent in whole or in part upon its shape or design during end use, and which under normal conditions of use does not
release more than very small quantities or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to
employees."
EMERGENCY OVERVIEW: The BuggyBeds bed bug glue trap is a finilazed product that is intented to passively monitor for bed bugs by
luring and trapping the bed bugs. The trap is constructed of a clear polystyrene which consists of a top piece and a bottom piece. A non-
hazardous resin glue is poured into the bottom piece. Other ingredients are used as bio lures and/or fragrance.
EU DANGEROUS PREPARATIONS DIRECTIVE (DPD) LABELING AND CLASSIFICATION: This product oes not meet the definition of any
hazard class, as defined by the European Union Council Directives 67/548/EECand 1999/445/EC and subsequent Directives.
N/A
UPPER:
PRODUCT DESCRIPTION:
CAS #: Non-Hazardous
Crystal Polystyrene - Clear (Virgin & Recycled)
Resin Glue
EINECS #: 202-851-5
EINECS #: N/A – DNE
Not expected as a result of exposure to finished product.
None
SECTION 5: FIRE-FIGHTING MEASURES
N/A
N/A
Not expected as a result of exposure to finished product.
INGESTION:
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
MANUFACTURER'S NAME:
N/A
FLAMMABLE LIMITS IN AIR
N/A (Combustible Solid)
FLASH POINT:
ADDRESS:
BuggyBeds Bed Bug Monitoring Trap
U.S. & Foreign Patents Pending; Copyright Protection; U.S. &
Foreign Trademark Protection
VCM Products, LLC
EYES:
SKIN:
INGESTION:
Not expected as a result of exposure to finished product.
Constant monitoring and product replacement is not expected to cause any situation which could
lead to ingestion.
326 Brandon Blvd. Freehold, NJ 07728
[phone]
www.vcmproducts.com
A passive monitoring device to lure and detect bed bugs.
Treat symptoms.
Chemical Name of the Substances:
CAS #: 9003-53-6
DNE = Does Not Exist
INHALATION:
Page 1 of 3