Operation Manual

f
‘click’
h
i
en
21
f Fasten the two ends of the tensioning belt together
underneath the seat area. You should hear a ‘click’.
Pull the belt until it is tight.
g. Put the tailored seat fabric over the base fabric. Pull the
shoulder belts and the waist belts through the tailored
seat fabric. Then attach the tailored seat fabric to the
base fabric with the touch fasteners.
h Now give shape to the seat by folding the seat pad
inwards.
i Attach the 2 touch fasteners at the foot end to
the underneath the frame.
Important Make sure the carry handle is not attached to the
frame while trying to pull the tensioning belt over
the protruding pin.
Important Assemble the seat before fitting it onto the chassis.
The seat cannot be placed on the frame until it
has been assembled.
WARNINGS
• Ensure that the touch fasteners and tensioning belt
are fastened properly.
Z54010 - UG_C_rv00.indb 21 12/6/07 12:52:11