RS11 User Manual If a faulty product is found when setting up please email us at Contact@buffhomes.com TIPS: Battery backup is for saving TIME and ALARM settings only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Thank you for purchasing on BUFFBEE！Please read these instructions carefully and keep the user manual in safe place for future reference. Instructional Video Please scan the QR code here to access the instructional video of this product.
Features • FM Radio • 7 Colorful Night Light • 12/24H Mode • 9 Minutes Snooze • 0-100% of the Display Dimmer • 0-16 Level Adjustable Volume • Sleep Timer • Battery Backup (Only Memory Function) Power Specifications AC100-240V, 50/60Hz.
Front View Time In 12 hour mode Alarm On Top View Time Setting Alarm Setting On/Off Sleep Timer Radio On/Off Vol Down Vol + Up Snooze & Nightlight 3
Back View Display Dimmer Power Connector Bottom View Battery backup is for saving TIME and ALARM settings only Battery Compartment (Battery is built in already) Model:RS11 Input:100-240V Power:DC 5V-1A Made in China 4
Getting Started 1. Plug the adaptor into a standard household outlet, you will see 12:00 on the display and the clock is ready to be set. 2. Please remove the battery tab before use. Notice： • If the display is “blank” after plugging in, please check whether the DISPLAY DIMMER on the back is at the HIGH position. • Under the battery power, the display will go blank and preset alarm will not go off. Battery backup is for saving TIME and ALARM settings only.
Time Setting 1. Press the “ ” button to enter HOUR setting. The HOUR digits will flash on the display. Press “ ” or “ ” button to advance to the correct hour. HOUR Flashes 2. Press the “ ” button to confirm and enter MINUTE setting. When the MINUTE digits flash, press “ ” or “ ” button to advance to the correct minute.
MINUTE Flashes 3. Press the “ ” button to confirm and enter time format (12/24H) setting. Press “ ” or “ ” button to select time format. When using the 12-hour time format, AM/PM icon will appear on the display to suggest morning/afternoon time. 4. Press the “ ” button to confirm and exit the time setting mode. Notice： The clock will exit automatically from the TIME setup mode if no action is taken within 5 seconds.
Alarm Setting 1. Press the “ ” button to enter ALARM HOUR setting. The HOUR digits will flash on the display. Press the “ ” or “ ” buttons to advance to the desired hour. HOUR Flashes 2. Press the “ ” button to confirm and enter ALARM MINUTE setting. The MINUTE digits will flash on the display. Press the “ ” or “ ” buttons to advance to the desired minute.
MINUTE Flashes 3. Press the “ ” button to confirm and enter WAKE UP SOUND setting. The icon of alarm will flash on the display. Press the “ ” or “ ” buttons to choose from Bird chirping sound, Piano sound, Beep sound or FM radio which is the last tuned in radio station or the station you set in WAKE UP RADIO ALARM (Page 13). 4. Press the “ ” ALARM button to confirm and exit the alarm setting mode. Notice： The clock will exit automatically from the ALARM setup mode if no action is taken within 10 seconds.
Alarm Volume Setting When radio is OFF, press the “ ” or “ to select the volume level. (0-16 adjustable) A number will be shown on the display. ” buttons Volume Alarm Pause & Snooze When the alarm goes off, you have two options: 1. Press “ ” button to stop the alarm when it’s ringing. Alarm will go off on the next day.
2. Press “ ” button to snooze, the indicator “ ” will flash on the display. The alarm will go off again 9 minutes later. Alarm On/Off 1. Press the “ ” button to turn on alarm. 2. Press and hold the “ ” button for 2 seconds to completely turn off alarm and the indicator “ ” will disappear on the display. The alarm will NOT go off on the next day. Nightlight Setting 1. Press the “ ” button to turn on the nightlight. Then press the “ ” button to change the color of the night light. 2.
FM Radio Setting Please extend the FM antenna on the back of the clock. 1. Press the “ ” button, FM radio will be ON/OFF. 2. Press and hold “ ” button for 2s, FM radio will scan and auto-store the scanned stations. Once the station search is completed, the first station will be played automatically. Press the “ ” or “ ” buttons to tune from auto-store stations. 3. Use the “ ” or “ ” buttons to adjust the volume of FM radio. 0-16 level adjustable.
Wake Up Radio Alarm Setting When radio is on, press the “ ” or “ ” button to tune radio stations you like, then press and hold “ ” button until icon “AL” appear on the display screen. The clock immediately saves this station as Wake Up Radio Alarm Sound. Sleep Timer You can use sleep timer to turn off nightlight and radio automatically when the preset sleep timer comes.
1. Press repeatedly the “ ” button to select the sleep timer ranging from OFF, 15, 30, 60, 90,to120minutes. The sleep timer will be seen on display. 2. To turn off the sleep timer, press “ ” button to select “OFF” and wait for 3 seconds for it to work or hold “ ” button for 2seconds to turn it off directly. 3. When sleep timer is on, press “ ” button to see the sleep timer remained. Brightness Setting Slide the DISPLAY DIMMER slider at the back of the clock to adjust the display brightness.
Battery Operated Setting Install 1* CR2032 battery into Battery Compartment. (Battery is built in already). Notice: Battery backup is for saving TIME and ALARM settings only. Support The radio alarm clock comes with one year warranty. If you have any issue with this radio alarm clock, please contact us at Contact@buffhomes.com. We will address your issue within 24 hours.
