User manual

2) disconnect
modem computer
Conrm that the
switch is positioned to
“Auto”.
OFF
modem
LAN cable
1) connect
2) connect
AirStation
Internet
port
or
3G USB
modem
AirStation
WZR-HP-G450H User Manual 18
Chapter 3 Installation
Manual Setup
To congure your AirStation manually, follow the procedure below.
1
Verify that you can connect to the internet without the AirStation, then turn o your modem
and computer.
2
Unplug the LAN cable which connects
your computer and modem.
3
Make sure the mode switch on the
back of the AirStation is in the “auto”
position.
4
Plug one end of the LAN cable into your modem and the other end to the AirStation’s
Internet (WAN) port. Turn on the modem.
To use a 3G USB modem instead, connect it to the AirStation’s USB port.
Do not use both modems at the same time.