User manual
WZR-HP-AG300H User Manual 18
Chapter 3 Installation
7
Once your computer has booted, the AirStation’s LEDs should be lit as described below:
Power Green light on.
2.4 GHz Green light on or amber light is on.
5 GHz Green light on or amber light is on.
Router Green light on or o depending on your network.
Diag O
LAN Green light on or blinking.
Internet Green light on or blinking.
For LED locations, refer to chapter 1.
8
Launch a web browser. If the home screen is displayed, setup is complete.
If username and password elds are displayed, enter “root” for the user name. Enter “admin”
for the password if you’re using the professional rmware (default), or leave the password
eld blank if you’ve switched to the user-friendly rmware. Click [OK]. Step through the
wizard to complete setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
Firmware Differences
You can choose between two dierent rmwares for your AirStation. By default, the professional
rmware (dd-wrt) is installed. If you prefer, you may install the user-friendly rmware instead. The
two rmwares have slightly dierent features, as shown in the chart below.
Function Professional rmware (dd-wrt) User-friendly rmware
Router mode switch functionality
─
a
Default administrator name root root (xed)
Default administrator password admin none
AOSS
a a
WPS
a a
WDS
a
─