User manual

WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual 64
Appendix
300 Mbps Mode settings
By default, the AirStation’s 300 Mbps mode is disabled. Use the following proceedure to enable it if
desired.
1. Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation 300Mbps Mode
Setting] and launch the utility software.
If you are using Windows 7 or Vista and see the message "A program needs your permission
to continue", click [Continue].
2. When "300 Mbps Mode Wizard" is displayed, click [Next].
3. Click [Next].
4. When the message "Select wireless adapter" appears, select this unit and click [Next].
5. Select "Use 300Mbps Mode (40MHz)", and click [Next].
6. When the message "Setup of wireless adapter is complete" is displayed, click [Finish setup].
If you still cannot establish a 300 Mbps connection, check the settings for your access point.