User manual

Chapter 3 Connect to a Wireless Network
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual 19
8
Use a computer with a wired connection to the access point to log in to the access point.
Navigate to the WPS PIN page.
Note: If the access point is a Bualo AirStation, navigate to [Wireless Cong]> [WPS] to enter the PIN.
9
Enter the PIN that you wrote
down in step 6.
Setup will take several seconds. When the connection is complete, the message "Connection has
been Completed" is displayed in Client Manager V. If the “Set Network Location” wizard opens, select
“Home”, “Work”, or “Public location” depending on the environment in which the AirStation will be
used.
Note: For a Bualo AirStation, enter
the PIN in [Enrollee PIN] and
click [OK].