Setup guide

73
73
6.7 Glossary of Terms Used in the PPPoE settings
User Name – This is the user specified name that is to be recognized by your Internet service provider.
Up to 64 letters are permissible.
Password - This is the user specified password that is to be recognized by your Internet service provider.
Use the same password in the “confirm” box. Up to 64 letters are permissible.
Service Name - If more than 2 PPPoE servers exist in the system, a specific server can be selected for
providing your PPPoE service. If a specific server is not selected (you leave the box blank), the Airstation
Accesspoint will pick a server and connect to the server automatically. If your Internet service provider
specifies nothing, leave it blank.
Connection Method – Set the specific timing that enables connecting to the PPPoE server.
Continuous connection – Connecting to the PPPoE server as soon as the device is up and keeping
that connection. The system will re-connect automatically even the user tries to disconnect manually from
the screen.
On demand connection – The system connects to the PPPoE server only when the user wants to
connect to the Internet.
Manual connection - The system connects to the PPPoE server only when the user clicks the connect
button on the setting screen.
Cut off period - The user can set the cut off period that disconnects the connection automatically after
the communication becomes inactive. If the user selects the continuous connection in the connection
method, the cut off period will be ignored. If the user wishes not to cut off, the user can input [0] in the
box.