Setup guide

72
72
11. Input the “User Name” and “password” given by your Internet service provider. Reenter the
“password” in the “confirm” textbox and then click Set.
12. Click Return and then Click Basic. The basic setting screen will be shown.
13. Select use the PPPoE client function for the WAN-side IP address acquisition method, and
then click set.
The Setting will be completed and the Airstation Accesspoint will be rebooted.
14. After closing the web browser, it is recommended to recheck the setting parameters again.
15. If PPPoE Status appears in the screen, the setting is completed successfully.