Setup guide

35
35
12. Click OK to close the WliL11 properties dialog box.
13. Click OK to close the Windows NT Diagnostics Dialog box.
14. Click the Start on the taskbar, and select Settings from the Start menu.
15. Select Control Panel. The Control Panel group appears.
16. Double-click the Devices icon.
17. Verify that the status for the MELCO Wireless LAN Card is started and that the Startup
setting is Automatic.
18. Verify that the status for PCMCIA under devices is started and that the startup setting is
Automatic.
19. If the status is not started, (see above) select the PCMCIA Device and click the Startup Button.
20. Select Automatic and click OK.
21. Click the Close button.
22. Restart your computer for the changes to take effect.