Setup guide

7. Type your CD-ROM drive letter and then PCML11\Winnt. It should look something like

this (E:\PCIL11\Winnt).

8. A dialog box will come up with Melco WLI-PCM-L11 wireless LAN adapter

highlighted.

9. Click OK. You will then see a WLI-PCM-L11 configuration box.

10. Click the Basic settings tab.

11. Check the infrastructure mode checkbox.

12. Check the WLI-PCI-L11 mode checkbox if using a PCI-adapter card.

13. The ESSID textbox will then ungray. Type the word “ANY” or if you have more than one

Airstation Accesspoint on your network, input the last six characters of the MAC address

and the word “GROUP”, with no space between them of the specific Airstation Accesspoint

you want to connect to. All alphabetical characters need to be capitalized. You can find the

last six characters of the MAC address by looking on the back of the Airstation Accesspoint.

There will be two stickers, one of which will start with 00. For example, if the Mac Address

is 004026 8A9090, then the last six characters of this number (8A9090) will be the MAC

address.