Setup guide

22
22
5. If you are using a PCI-adapter (i.e. Desktop), select the WLI-PCI mode and make sure it is set
to ON otherwise if you are using a laptop, set it to OFF.
6. Select the Station name property and type the word “ANY” or if you have more than one
Airstation Accesspoint , type the last six characters of the Airstation Accesspoint MAC address
following by the word “GROUP”, with no space between them in the value textbox. All
alphabetical characters need to be capitalized. You can find the last six characters of the MAC
address by looking at the back of the AirStation Accesspoint. There will be two stickers, one of
which will start with 00. For example, if the Mac Address is 004026 8A9090, then the last six
characters of this number (8A9090) will be the MAC address.
7. Click OK.
8. Click NO if prompted to restart the computer.
9. Select the TCP/IP protocol in the Network properties dialog box and click the Properties
button.