Setup guide

16
16
2.1 UPDATING PCI-ADAPTER CARD DRIVER
1. Click Start on the taskbar, and select Settings from the Start menu
2. Select Control panel, and the Control Panel group will appear
3. Double-click the System icon and click the Hardware tab
4. Click the Device Manager button.
5. Make sure the following device name is listed in the PCMCIA Adaptors.
WLI-PCI-OP:
Ricoh R/RL/RT/RC/5C475(II),R5C520 or Compatible CardBus Controller.
If the PCMCIA ADAPTER listed is “buffalo WLI-PCI-OP Bridge” then you have the latest
driver installed. Skip this section.
6. Double-click the device name. (Ricoh R/RL/RT/RC/5C475(II),R5C520 or Compatible
CardBus Controller)
7. Select the Driver tab and click the Update Driver button.
8. Click Next.