Setup guide

14
14
15. Type the word “ANY” or if you have more than one Airstation Accesspoint on your network,
input the last six characters of the MAC address of the specific Airstation Accesspoint you want
to connect to . The Media Access Control (MAC) address can be found on the back of the
Airstation Accesspoint. For example, if the Mac Address is 004026 8A9090, then the last six
characters of this number (8A9090) will be the MAC address. Please note that it is case sensitive,
i.e. it must have capital letters where there are capital letters, and lower case letters where there
are lower case letters. Click OK
16. Click OK
17. The Client Manager will search for the Airstation Accesspoint on the Network. Your Airstation
Accesspoint will show up in the Window. When connected to the Airstation Accesspoint , the
Airstation Accesspoint Name will be black and an antenna mark will also be displayed.
18. Refer to section on Configuring your Airstation Accesspoint .