User manual

11 Installation / Setup
4.3.
2 N
a
m
e
a
n
d
P
ass
w
o
r
d
A
ir
Stat
i
o
n n
a
m
e
- Select a unique name to
m
ake it easier to identify each AirStation.
A
dm
i
n
i
strator nam
e
- “root”, cannot be
changed
A
dm
i
n
i
strator
p
asswor
d
- Allows the
ad
ministrator to enter an a
d
ministrator pass
-
w
or
d
to restrict access to t
h
e setting screens
.
Enter new password. Enter up to eight alpha
-
numeric characters (case sensitive) and confi rm
password
■ Note: If password is forgotten or misplaced, The WLA-G54C can be returned to all the factory default
settings by holding down the INIT button on the back of the unit for three seconds.
4.3.3 Time setup
Time setup - Enter the current date and time,
and click Set.
NTP - Select Use or Do not use.
■ Note: If NTP is used, time is set au to mat i cal ly.
NTP server name - Enter the NTP server
name
Check Interval - Enter the time interval for time
check frequency
Time Zone - Select local time zone
Click Set.
4.3.4 Transfer Packet Condition
Displays number of packets sent and received
fo
r
:
W
ired WA
N
W
ired LAN
Wi
reless LAN
Click Refresh to start new transfer packet
log.
4.3.5 PING Test
Performs a PING test from the AirStation to
a LAN or WAN address.
Enter the target IP address and click OK (e.g.
192.168.11.2 - OR- www.buffalotech.com)
Fig ure 4.
3
.2
N
a
me
a
nd
Passwo
r
d
Fig ure 4.
3
.
3
Time Setu
p
Fig ure 4.3.4
Transfer Packet
Information
Fig ure 4.3.5
Ping Test