User manual

76
Common Problems:
• Out of range, client cannot connect to the AirStation.
•Congurationmismatch,clientcannotconnecttotheAirStation.
•AbsenceorconictwiththeClientDriver.
•ConictofanotherdevicewiththeAirStationhardware.
B.1.1 LED Activity B
Monitoring LED activity helps identify problems.
• Power LED should be GREEN,
• Wireless LED should be GREEN if the line is active. If is it blinking GREEN, wireless communica
-
tion is active.
• Ethernet LED should be GREEN (100Mbps) or AMBER (10Mbps) while the communication is ac
-
tive.
DIAG LED Activity
Unplug the power for three seconds. Plug the power back in to monitor the DIAG LEDs during start-up.
If any symptoms match section B.1.1, call the Buffalo Tech Support line 24 hours a day, 7 days a week
at 866-752-6210 or email [e-mail].
Troubleshooting