User manual

53
nolongerhaveaccesstotheAirStationcongurationscreens.Thisfunctionprohibitssetupfrom
a wireless or wired computer. The AirStation can be returned to the factory default settings by
holdingdowntheINITbuttononthebackoftheunitforvesecondsoruntiltheredDIAGlight
becomes solid.
Protocol -Markandselectaspecicprotocol.Selectfromall protocols, ICMP, arbitrary protocol
number and TCP/UDP protocol number.
•
All - Selects all IP protocols.
•
ICMP - Network Diagnostic Protocol (1).
•
Manual - Enter protocol number (0-65535).
•
TCP/UDP Destination Port - Select TCP or UDP, then enter port number.
Priority - Specify the priority an item. The smaller the number, the higher the priority.
MAC Filter - Click Enter MAC
ltertoenterMACaddress.
Source MAC address -The
MAC address of the source of
thepacketsthatwillbeltered
may be set. Click Add rule
when complete.
Advanced Settings
Add MAC
Filter
setting