User manual

32
LAN Port
Set the LAN side Ethernet
settings.
LAN Side IP Address - Allows
administrator to specify a static
IP and Subnet Mask for the
LAN side of the AirStation.
◗ Note: If the AirStation’s IP
address is changed, the con-
guringcomputer’sIPmustbe
changed to the same range to
continueconguration.Ifthe
LAN IP is changed, restart the
AirStation. (Section 4.4.10). If
the IP address is changed, then the DHCP scope must be changed to match.
DHCP Server Function - Allows administrator to enable/disable the DHCP server function for the
AirStation LAN side. Select Use to enable and Do not use to disable the function. Once Use is
selected,theassignedIPaddressrangecanbespecied.EnterthestartingLANIPaddressand
total number of computers the DHCP server can accomidate.
◗ Note: If there is another DHCP server on the network, one either must be disabled or the IP
rangemustbechangedtoavoidconictsderivedfromoverlappingDHCPscopes.
LAN Port
Settings
Advanced Settings