User manual

you to combine and share wired and wireless computers and printers with the high-speed internet

connection.

1.PowerdownthecableorDSLmodemandthecomputerwhichwillbeusedtocongurethe

AirStation router.

2. Plug the cable or DSL’s LAN Ethernet cable into the AirStation’s WAN port. Initially, you may

need to unplug this cable from your computer, hub or other router.

3. Plug the provided Ethernet cable into a LAN port on the AirStation and plug the other end into

yourcomputerEthernetadapter’s(NIC)port.IfyouplantoinitiallyconguretheAirStationviaa

wireless connection, (not recommended), you may skip this step.

4. Power on your cable or DSL modem, wait one full minute, Power on the AirStation router, wait

anotherfullminuteandthenpoweronthecomputerwhichwillbeusedtoconguretheAirSta-

tion.IftheredDIAGlightontheAirStationislitorashingafterseveralminutesofbeingpow-

ered on, please consult Buffalo Technical Support.

Installation / Setup