User manual

40
Access Control
Security - Access Control (Router Mode Only)
Access Control Check to enable access control. Click Add to configure the schedule.
Add Access Control
Enter the computer’s MAC address in the Target Computer field. You can add up to 20
network computers.
Permitted Access Time Displays the time that the computer is allowed to access to the Internet.
Register Configure the schedule, then click Edit Permitted Access Time. The schedule is registered.
QoS
Configure QoS (quality of service) settings here.
Applications - QoS (Router Mode Only)
QoS Enable or disable QoS.
Upload Bandwidth
Specify the upstream bandwidth in kbps from the AirStation to the Internet side. Set the
actual value for the upstream bandwidth.
Enable Enable or disable this entry.
Application Name
Enter an application name. Names may use up to 32 alphanumerical characters, double
or single tick marks (“’), quotation marks (“), and semicolons (;).
Protocol Select either TCP or UDP.
Destination Port
Specifies a destination port from 1 - 65535. If this field is empty, a random port is
selected.