User manual

1
2
3
4
5
6
WHR-HP-GN / WHR-HP-G300N User Manual 8
Chapter 1 Product Overview
Hardware Overview
Front Panel LED's
1
AOSS Button
HolddownthisbuttonuntiltheSecurityLEDashes(aprox.1
second),whiletheunit’spowerison,initiatesAOSS/WPS
 mode,allowingtheunittoexchangesecuritykeyswithAOSS
or WPS compatible devices.
2
POWER LED (Green)
On:  TheACadapterisconnected
 O:  TheACadapterisnotconnected
3
SECURITY LED (Amber)
Indicatessecuritystatus.
 O: Encryptionisnotset
 On: Encryptionhasbeenset
Double blink: The unit is waiting for an AOSS or WPS
security key
 Blinking: AOSS/WPSerror;failedtoexchangesecuritykeys
Note:WhentheSecurityLEDislit,anencryptionkeyhas
been set. You can verify that the encryption key has
been set in the web conguration screen on page 40.
4
WIRELESS LED (Green)
IndicateswirelessLANstatus.
 Blinking: WirelessLANistransmitting
 On:  WirelessLANisconnectedbutnotactive
5
ROUTER LED (Green) On: Router functionality is enabled
Blinking: Router functionality is disabled
6
DIAG LED (Red) This indicates the status of this unit depending on the number of
blinks per cycle.
   Note:Whentheunitisrstturnedonorrestarted,theDiagLEDwill
blink for almost a minute during boot. This is normal.