User manual

WHR-HP-GN / WHR-HP-G300N User Manual 86
Chapter 6 Trouble Shooting
 2. Click"Wireless SSID & Channel (11n 300(150)Mbps Mode)"inEasySetup.
 3. Changethevaluein"300(150) Mbps Mode" - "Band Width" to 40 MHz and click "Apply".
Ifyoustillcannotconnectat300/150Mbps,checkthesettingsofyourwirelessclientdevice.
Other Tips
Issue:
Iresetmywirelessroutertofactorysettingsandforgothowtologin.
Answer:
Openyourbrowserandenter192.168.11.1asthebrowseraddressandhitEnter.Youwillbe
promptedtologin.Entertheusernameasrootandthepasswordboxisleftempty(nopassword).
Click"OK" to complete the login and the option to reset your password will be available on the rst
page.
Issue:
HowdoIforwardportsonmywirelessrouterformygamingconsole?
Answer:
Logintotherouter.Fromthehomepage,gototheInternetGame/PortMappingsection.Enterthe
portthatneedstobeforwarded,andtheIPaddressofthegamingconsole.
Issue:
HowdoIenableormodifysecurityencryptionsettingsonthewirelessrouter?
Answer:
Logintothewirelessrouterwithyourbrowser.GototheWirelessCongtabandthenselectthe
Securitytab.BualorecommendstheuseofWPAforwirelessencryption.Thepassphrase/key
shouldbeatleast8charactersinlength.