User manual

Chapter 4 Conguration
WHR-HP-GN / WHR-HP-G300N User Manual 41
Parameter Meaning
InitiatesAOSSautomaticwirelessconguration.Clickthis,then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
ClickthisbuttontodisconnectAOSSconnections.
Note:IfAOSSconnectionsaredisconnected,theSSIDandencryptionkeys
will be restored to their most recent settings before using AOSS.
EncryptionTypeofExclusiveSSIDfor
WEP
YoumayallowaseparateSSIDspecicallyforWEPconnections.If
“disabled”isselected,thenclientswillnotbeabletoconnectwith
WEP.
Encryptionlevelexpansionfunction ExpandssecuritymethodfromTKIPtoWPA/WPA2-PSK-mixed
mode.
DedicatedWEPSSIDisolation SetaseparateSSIDandnetworksegmentspecicallyforWEP
connections.DevicesconnectedwithWEPwillnotbeable
tocommunicatewithdevicesconnectedusingAES/TKIP.All
connected devices will be able to communicate with the internet.
AOSS Button on the AirStation Unit Determine whether congure AOSS or not when the physical AOSS
button is pressed.
CurrentEncryptionInformation
*AOSSConnectiononly
Displaystheencryptiontype,SSID,anencryptionkeyconguredby
AOSS.
[Random] ClicktoenterrandomvaluesforSSID,encryptionkey,andother
settings.
[KEYbase] ClicktoreturntheSSID,encryptionkey,andotherwirelessssettings
to the values on the case sticker.
[Reset] ClicktoreturntheSSID,encryptionkey,andotherwirelesssettings
to their previous values.
AOSSClientInformation
*
*AOSSConnectiononly
Displays AOSS clients connected to the AirStation and information
of the devices which are wirelessly communicated.
AOSSEthernetConverterInformation
*
*AOSSConnectiononly
Displays information about ethernet converters connected to the
AirStation via AOSS.