User manual

WHR-HP-GN / WHR-HP-G300N User Manual 28
Chapter 4 Conguration
Parameter Meaning
PPPoEConnectionNo.*-Add Thisisdisplayedwhenclicking“Edit Connection List”.
Name of Connection
 Enterthenametoidentifytheconnecteddestination.Youmay
enter up to 32 alphanumerical characters and symbols.
User Name
Set the user name which is specied by your provider, used for
aPPPoEcertication.Youmayenterupto32alphanumerical
characters and symbols.
Password
 SetthepasswordspeciedbyyourproviderforPPPoE
certication. You may enter up to 32 alphanumerical characters
and symbols.
Service Name
Fill in this eld only when your provider species a Service Name.
Leaveblankotherwise.Youmayenterupto32alphanumerical
characters and symbols.
Connection Type
Species the timing for the AirStation to connect to your provider.
Automatic disconnection
Set time to disconnect after communication is stopped when the
connection method is set to "Connect on Demand" or "Manual".
You can enter up to 1440 minutes.
Authorization
 Congureanauthorizationmethodwithaprovider.
MTU Size
 CongureMTUvalueintherangeof578to1492,whichisused
forcommunicationonPPPoE.
MRU Size
 CongureMRU(MaximumReceiveUnit)valueintherangeof578
to1492,whichisusedforcommunicationonPPPoE.
PreferredConnections Displays information you have set regarding to the connection
destination route.
[EditPreferredConnections] Clickthisbuttontodisplaythescreentoeditthesettingsof
connection destination route.