User manual

Chapter 3 Installation
WHR-HP-GN / WHR-HP-G300N User Manual 17
5
ConnectyoucomputertooneoftheAirStation’sLANportswiththeLANcable.
Turn on the AirStation, wait one minute, and then turn on your computer.
ROUTER
POWER
INTERNET
LAN
ᴮ
ᴯ
ᴰ
ᴱ
ON
OFF
AUTO
power outlet
AirStation wireless router
(rear side)
PC
1) connect
1) connect
LAN cable
2) connect the power supply
6
Conrmthedevicesareconnectedcorrectlyasthebelowdiagramshows.
ON
modem
power outlet
computer
7
Waitforawhile,andthenmakesurethattheAirStation’sLEDsarelitasdescribedbelow:
POWER Greenlightison
WIRELESS Greenlightisonorblinking
ROUTER Greenlightisonorodependingonyournetwork
DIAG O
LAN Greenlightisonorblinking
INTERNET Greenlightisonorblinking
※
Refertopage8and10forLEDlocationsandotherdetails.
8
Launchawebbrowser.Ifthe“home”setupscreenisdisplayed,setupiscomplete.
Ifausernameandpasswordscreenisdisplayed,enter"root" (in lower case) for the user name,
leavethepasswordblank,andclick“OK”. Follow the instructions on the screen to complete
setup.
You’vecompletedinitialsetupofyourAirStation.RefertoChapter4foradvancedsettings.