User manual

Chapter 1 Product Overview
WHR-HP-GN / WHR-HP-G300N User Manual 9
Diag LED
status
Meaning Status
2 blinks *
1
Flash ROM error Cannotreadorwritetotheashmemory.
3 blinks *
1
Ethernet(wired)LAN
error
EthernetLANcontrollerismalfunctioning.
4 blinks *
1
WirelessLANerror WirelessLANcontrollerismalfunctioning.
5 blinks IPaddresssettingerror BecausethenetworkaddressesofboththeIneternetport(WAN
port)andtheLANportarethesame,itisnotpossibletoestablish
communication.ChangetheLANsideIPaddressofthisunit.
Continuously
blinking
*2
Updating the rmware
Saving settings
Initializingsettings
Updating the rmware.
Saving the settings.
Initializingthesettings.
*1 UnplugtheACadapterfromthewallsocket,waitforafewseconds,andthenplugitagain.Ifthe
lightstillashes,pleasecontacttechnicalsupport.
*2 NeverunplugtheACadapterwhiletheDiagLEDisblinkingcontinuously.