Operation Manual

7
a. Resetting the Router - Push and hold the Reset button for one second then
releaseit.WhenthePowerLEDbecomessolidagain,theresetiscomplete.
b. Restoring to Factory Defaults - Press and hold the Reset button for 10
secondsthenreleaseit.WhenthePowerLEDbecomessolidagain,therestore
is complete.
Label on the back side
Thislabelshowstherouter’sMACaddress(SSID),securityPIN,andpresetAES
KEYinformation.
TheWBMR-HP-GNissecuredbyAESencryptionindefaultconguration.
Positioning your Router
Your wireless connection will be stronger the closer your computer is to your
Router.Typicalindooroperatingrangeforyourwirelessdevicesisbetween
30m and 60m. In the same way, your wireless connection and performance
will degrade somewhat as the distance between your Router and connected
devicesincreases.Thismayormaynotbenoticeabletoyou.Asyoumove
farther from your Router, connection speed may decrease. Factors that can
weakensignalssimplybygettinginthewayofyournetwork’sradiowaves
aremetalappliances,orobstructions,andwalls.Ifyouhaveconcernsabout
your network’s performance that might be related to range or obstruction
factors,trymovingthecomputertoapositionbetween1.5mand3.0mfrom
the Router, in order to see if distance is the problem.
Installng Your Router
3
Smart Wizard Installation
TohelpsetupyourrouterandconnecttotheInternetquickly,theresource
CDcontainsaSmartWizard.ThewizardontheAirNavigatorCDwillassist
inconnectingyourequipment,conguringwirelesssettingsandenabling
security.InserttheCD,launchthewizardandfollowthestepsasindicated.
YouwillneedtheADSLsettingsinformationasprovidedbyyourISP.
Alternatively,tosetuptheconnectionmanually,proceedtothenextsection.
Note:IfyouhaveaMacintoshorLinuxsystem,youwillneedtousethe
manual installation method.