Operation Manual

Back Panel

1. DSL Line

Connect your ADSL line to this port.

2. LAN Ports

TheEthernetportsareRJ45,10/100auto-negotiation.Theportsarelabelled1

through4.TheseportscorrespondtothenumberedLEDsonthefrontofthe

Router.Connectyournetwork-enabledcomputersoranynetworkingdevices

to one of these ports.

3. Security Selection Switch

Thisswitchallowsyoutochoosetherequiredmethodtocongureawireless

connection,eitherWPSorAOSS.ToinitiateAOSS,youmustalsopressthe

AOSSbuttononthetopofthedevice.

4. Power

Connect the included power cord to this inlet.

The "Reset" button is located on the bottom of the modem router and should

be used in rare cases when the Router may function improperly. Resetting

the Router will restore the Router’s normal operation while maintaining the

programmed settings.

You can also restore the factory default settings by using the Reset button.

Usetherestoreoptionininstanceswhereyoumayhaveforgottenyour

custom password.