Operation Manual

25
Updating the Router’s Firmware
1. In the “Update” screen, click “Browse”. A window will open that allows you
to select the location of the rmware update le.
2. Browse to the rmware le you downloaded. Select the le by double-
clicking on the le name.
3. Click “Update Firmware”toupdatetothelatestrmwareversion.
DIAGNOSTIC
Diagnostic panels show the current status of your modem router, its local
network connection, the wireless interface, and the DSL link. The informa-
tion displayed is read-only ie. you cannot change any settings through these
panels.
System Info
Display the AirStation’s main settings.
Logs
Displays log information recorded by your AirStation. Select the type of
information you wish to log and the location.
Packet Info
DisplaysthetotalnumbersofpacketssentandreceivedbytheAirStation,
and any errors.
Client Monitor
DisplaystheLANsideclients(PC’s)thatareaccessingtheAirStation.
Ping
A Ping test can be performed from your AirStation. With a ping test, you can
establish whether the AirStation can communicate with a specic network
device.EnterthenetworkIPaddressthatyouwanttoping;e.g.192.168.11.3
or www.bualotech.com. Click “Execute” and the results of the test are
displayed.
DSL Connection
If a DSL link has been established, technical information about it is shown
here.ThePVCConnectionsectionreectssettingsintheInternetConnection
andVCSettingsareasoftheInternet/LANpanel.