Operation Manual

15
localIPaddress.NATisenabled(turnedon)bydefault.Disableitifyoudonot
need it.
Wireless Cong
ForinformationonconguringaconnectionwithWPSorAOSS,pleaserefer
to the earlier sections of the manual which describe how to use these meth-
ods to establish a wireless connection.
Basic
The “Basic” tab lets you make changes to the wireless network settings - wire-
lessnetworkname(SSID),radio,operatingchannelandsecuritylevel.
Wireless Radio
Select Disable to turn o wireless networking, or select the type of wireless
networkyouaresettingup:Mixed(with11b,11gandDraft11nclients),
BG-Mixed(withonly11band11gclients),orsolely11b,11gorDraft11n
clients. Using the correct setting here ensures that the network will work as
eciently as possible.
Wireless Channel
Your Router is congured to operate on the proper channels for the country
you reside in. If there are other wireless networks operating in your area,
your network should be set to operate on a channel that is dierent than the
other wireless networks. For best performance, use a channel that is at least
vechannelsawayfromtheotherwirelessnetworks.Forinstance,ifanother
network is operating on channel 11, then set your network to channel 6 or
below.