Operation Manual

•Afterconnectingthepowercordandthepowersourceisturnedon,the

Router’s power icon on the front panel should be on. It might take a few

minutes for the Router to fully start up.

•Turnonyourcomputer.Afteryourcomputerbootsup,theLANstatusLED

on the front of the Router will be on for each port to which a wired computer

isconnected.Theselightsshowyoutheconnectionandactivitystatus.Now

you are ready to congure the Router for ADSL connection.

In order for your computer to properly communicate with your Router, you

willneedtochangeyourcomputer’s'TCP/IPEthernet'settingsto'Obtainan

IPaddressautomatically/UsingDHCP'.Thisisnormallythedefaultsetting

in most home computers. Consult your operating system’s Help les for

informationonchangingthissetting,ifrequired.